Stainless steel brings into play in all spheres of human being activity. This is utilized from heavy mechanical engineering to electronics and precision mechanics.
According to stainless steel pipe manufacturers, this material is widely used in:
Construction and architecture
Food Industry
Chemical and petrochemical industry
Pulp and paper production
Environmental protection
Construction and architecture:
Stainless steel first appeared about a hundred years ago, but it has recently begun to be widely used in construction and architecture. It has been used in the construction and design of the largest shopping.
The anticorrosive properties of 304 Stainless Steel Pipe appear due to the presence of a chromium oxide layer on the metal surface. This protective layer is very stable and, even after mechanical or chemical damage, quickly takes on its former appearance. The anti-corrosion properties of the metal remain unchanged.
The 316 Stainless Steel Pipe is very practical, at the same time noble and aesthetic. Due to the variety of grades and types of surface, it can meet the different conditions that appear in front of the building.
In addition to anti-corrosion properties, the following qualities should be noted:
Variety of products (sheet, pipe, profile, bar, corner, mesh),
Many brands with different qualities,
The durability of the material,
High melting temperature.
The reliability of the elements made of Stainless Steel Sheet is much higher than that of other materials.
It is also a good decorative material for equipping restaurants, offices, pubs, discos and metro stations. Increasingly, Stainless Steel Tube is used to produce furniture for offices and shops. By combining stainless steel with glass, wood or stone, you can get beautiful and elegant products.
There is a misconception that stainless steel is an expensive material. In fact, 304 Stainless steel sheet is durable. Its cost is not high, especially when you take into account the huge period of operation.
Food industry:
Today 316 Stainless steel sheet, together with glass and some other synthetic materials, is an almost irreplaceable material for the manufacture of equipment for processing, storing and transporting food.
There are specific requirements regarding the rinsing of heavy metals from equipment that is in constant contact with food. According to ss fittings manufacturer, the number of np chromium and nickel washed off stainless steel is a maximum of 2 mg / dm3. With austenitic steels, the amount of these metals is less than 0.02 mg / dm3, in a word, about 1% of the permissible norm.
The stainless steel grades used in the food industry are ss 304 fittings, and AISI 316, steels with a large amount of alloying are rarely needed. A good surface appearance is essential. The standard surface 2B is sufficient for this, but sometimes polishing is necessary.
Chemical and petrochemical industry:
The minimum acceptable grade here is ss 316 fittings; steels with a molybdenum content of up to 6% are often used. Selecting a stainless steel grade is difficult and requires in-depth knowledge.
Pulp and paper production:
According to Stainless Steel Forged Fittings Manufacturer most of the equipment used in the paper and pulp industry is made of steel grade AISI 316.
Environmental protection:
Modern society tries not to pollute the environment. Old factories and power plants are being closed or refurbished. Environmental requirements are building new factories. According to Stainless steel flanges Manufacturer, the consumable material is stainless steel.